Tengcan Lyrin
Search For
Enter
Cancel
这是描述信息
/
/
Fireproof and flame-retardant acrylic sealant

APPLICATION FIELDS

Recognized as a world-wide silicone solution proffessor in China

Check category

Fireproof and flame-retardant acrylic sealant

  • Author:fireproof acrylic sealant, acrylic sealant
  • Origin:fireprood flame retardant acrylic sealant
  • Time of issue:2022-09-03 13:39
  • Views:0

Fireproof and flame-retardant acrylic sealant

(Summary description)

  • Categories:News
  • Author:fireproof acrylic sealant, acrylic sealant
  • Origin:fireprood flame retardant acrylic sealant
  • Time of issue:2022-09-03 13:39
  • Views:0
Information

Basic parameters
Product introduction:
Fireproof and flame-retardant acrylic sealant is a water-based and environmentally friendly fireproof and flame-retardant sealant with fire and smoke prevention functions. It is widely used for bonding and sealing indoor and outdoor buildings, home decoration and joints. It can also trim the interior decoration cracks and repair the wall cracks. In addition, the product adopts a water-based formula, has a clean taste, green and environmental protection, and can be colored and painted.
Scope of application:
Widely used in various fire sealing occasions
1. Filling and sealing of doors and windows / walls / holes.
2. The gap between the skirting line, door frame, window frame, gypsum board ceiling and the wall shall be trimmed.
3. Fill the cracks in the wall.
4. Sealing between gypsum panels, cornices and decorative ceilings
usage method:
1. The bonding surface shall be clean and dry, and any impurities or sealant residues shall be removed. If necessary, masking tape shall be used to cover the adjacent surface of the joint.
2. Cut the sealant and put it into the glue gun to evenly squeeze the sealant into the joint.
3. Scrape off the excess sealant product with a scraper and smooth the sealant surface, or wipe a small amount of water on your fingers.
4. Remove the masking paper and clean the perimeter of the joint.
5. The construction environment temperature should be higher than 5 ℃ and lower than 45 ℃, which is not suitable for construction in humid or frost environment.
Precautions:
1. Keep out of the reach of children.
2. Do not use and operate until you have read and understood all safety precautions.
3. Wash contaminated skin thoroughly.
4. Wear protective gloves, protective clothing and goggles.
5. If in contact with skin, please wash with clean water.
6. If skin irritation occurs, seek medical advice.
7. If it enters the eyes, please rinse with water carefully for a few minutes. If you wear contact lenses, please remove them and rinse them.
8. If eye irritation persists, seek medical advice.
Storage method:
Unopened products shall be stored at 5 ℃ ~ 27 ℃ in a dry place
quality guarantee period:
The warranty period is 12 months from the production date

Tengcan Lyrin